Car Body Dent Puller Lifter Bridge Kit Paintless Dent Removal Too No Glue Included

Description:
- This lightweight T-Bar puller is a glue tab pulling tool, designed for repairing pressure dents and non-sharp, non-creased dents. It pairs well with a tap down hammer for large dents, is easy to control, and allows anyone to remove dents independently.
- The slide hammer offers more power for dent repair, tackling big dents effectively. Its working principle is to attach glue tabs to the dent, then use the tool to pull the tabs and lift the dent. Big dents require a slide hammer or puller; small dents need a mini dent lifter or pulling bridge.
- Different tabs are compatible with various dent lifters or slide hammers, working with all glue pullers.
- Use a slide hammer, dent lifter, or any pulling tool to lift the dent, repeating the process as needed.

Precautions: This product must be used with hot melt adhesive. Note that hot melt adhesive is not included and needs to be purchased separately.

How to Use:
1. Clean the dent surface with a damp cloth.
2. Insert the glue stick into the glue gun, pull the trigger to feed it in, connect the power supply, and preheat for 5 minutes.
3. Select an appropriate drawing gasket (use a large one for large dents).
4. Pull the glue gun trigger to apply the extruded glue onto the drawing gasket.
5. Quickly place the glue-coated drawing gasket at the center of the dent, press gently until the glue cures and adheres firmly.
6. Align the T-shaped repair tool with the drawing gasket, press it tightly, and pull the sliding rod backward to lift the dent.
7. Check the surface with a line board. If the dent remains, tap it lightly with a flattening hammer or pen.
8. Wipe the repaired area with a damp cloth to clean.

Packing list:
18x PDR Glue Pulling Tabs
1x 2 in 1 Dent Removel T Bar Tools(Not included Glue)